TECNO Spark 10 Pro KI7 Flash File 100% Firmware Tested

TECNO Spark 10 Pro KI7 Flash File 100% Firmware Tested

Dear Respected Visitors Welcome to Admin Gsm Borhan Which Provides All kinds of Android Firmware Flash Files. In this post, We have shared TECNO Spark 10 Pro KI7 Flash File Firmware With Manual Flashing Instructions. TECNO Spark 10 Pro KI7 Firmware Also Contains a Flash Tool and USB Driver. We have Uploaded the TECNO Spark 10 Pro KI7 Stock Firmware ROM after being Tested. many times.

TECNO Spark 10 Pro KI7 Flash File


All Support

This Firmware is Not Without a Password or is Free. This Rom is Only For Paid Premium

Call: 01884821503 –Bkash 01854302180

To use the new solution you MUST install the UsbDk_1.0.22 driver before running the software. Install UsbDk_1.0.22_x86.msi on 32-bit system and install UsbDk_1.0.22_x64.msi on 64-bit system.

Connect the Box / Dongle to the PC USB port and launch the Software

Select "MTK" platform from the tab menu in the upper left side of the software

Go to the "Service" tab

Press the "Bypass boot authorization" button

Connect the phone according to software prompts

The message "Done" indicates that the procedure was completed successfully

The boot authorization is disabled until you disconnect the cable.

Previous Post Next Post


Featured Posts