TECNO Spark 30C KL5 Flash File 100% Firmware Tested
Dear Respected Visitors Welcome to Admin Gsm Borhan Which Provides All kinds of Android Firmware Flash Files. In this post, We have shared TECNO Spark 30C KL5 Flash File Firmware With Manual Flashing Instructions. TECNO Spark 30C KL5 Firmware Also Contains a Flash Tool and USB Driver. We have uploaded the TECNO Spark 30C KL5 Stock Firmware ROM after it was tested. many times.
KL5-XK678ABCDEFGHIJKLMNAc-U-BASE-240829V1567
KL5-XK678KLMN-U-OPPJ-PJ-241109V1743
To use the new solution you MUST install the UsbDk_1.0.22 driver before running the software. Install UsbDk_1.0.22_x86.msi on 32-bit system and install UsbDk_1.0.22_x64.msi on 64-bit system.
Connect the Box / Dongle to the PC USB port and launch the Software
Select "MTK" platform from the tab menu in the upper left side of the software
Go to the "Service" tab
Press the "Bypass boot authorization" button
Connect the phone according to software prompts
The message "Done" indicates that the procedure was completed successfully
The boot authorization is disabled until you disconnect the cable.