Download MediaTek USB VCOM Drivers & Installation
If you are planning to flash firmware, remove FRP, or repair software issues on any MediaTek (MTK) powered Android device using SP Flash Tool, installing proper MediaTek USB VCOM Drivers on your Windows PC is the most crucial first step. Without these drivers, your computer will fail to detect the connected device.
Why Are MediaTek VCOM Drivers Important?
When an MTK phone is connected to a PC in preloader or meta mode, it communicates through virtual COM ports. VCOM drivers act as a bridge, allowing utility software like SP Flash Tool to establish a stable low-level connection with the device chipset.
Key Steps to Install MTK VCOM Drivers
- Download the Driver Package: Get the official signed driver setup matching your Windows architecture.
- Disable Driver Signature Enforcement: On Windows 10/11, temporary disabling may be required for unsigned classic drivers.
- Run Setup or Manual Install: Extract the files and install via Device Manager or run the auto-installer package.
Driver Installation Setup Wizard Demo
Welcome to the MediaTek Setup
This wizard will guide you through installing VCOM drivers. Click Next to continue.
License Agreement
I accept the terms
Installing System Files...
Registering virtual COM ports on PC...
🎉 Installation Complete!
Drivers installed successfully. Your PC is ready for SP Flash Tool.
Download MediaTek VCOM Drivers (Latest Versions)
You can download the verified MediaTek USB VCOM drivers directly from the secure third-party mirror links below:
Important Troubleshooting Tips
- Test Mode: If installation fails on Windows 10, enable Test Signing mode before installing unsigned drivers.
- Reboot PC: Always restart your computer after successful driver installation for optimal detection.